Archive for July, 2009

Tongue can drive powered wheelchair

Thursday, July 9th, 2009

With a huge boost from technology, individuals can now maneuver a powered wheelchair or control a mouse cursor using simple tongue movements.

“This clinical trial has validated that the Tongue Drive system is intuitive and quite simple for individuals with high-level spinal cord injuries to use,” said Maysam Ghovanloo, an assistant professor in the School of Electrical and Computer Engineering at the Georgia Institute of Technology. “Trial participants were able to easily remember and correctly issue tongue commands to play computer games and drive a powered wheelchair around an obstacle course with very little prior training.”

At the annual conference of the Rehabilitation Engineering and Assistive Technology Society of North America on 26 June, the researchers reported the results of the first five clinical trial subjects to use the Tongue Drive system. The trial occurred at the Shepherd Center, an Atlanta-based catastrophic care hospital. The National Science Foundation and the Christopher and Dana Reeve Foundation helped fund the project.

The clinical trial tested the ability of these individuals with tetraplegia, as a result of high-level spinal cord injuries (cervical vertebrae C3-C5), to perform tasks related to computer access and wheelchair navigation using only their tongue movements.

At the beginning of each trial, Ghovanloo attached a small magnet, the size of a grain of rice, to the participant’s tongue with tissue adhesive. An array of magnetic field sensors mounted on wireless headphones worn by the subject was able to detect movement of this magnetic tracer. Through a wireless interface, sensor output signals transmitted to a portable computer located on the wheelchair.

The signals were able to determine in real time the relative motion of the magnet with respect to the array of sensors. This information could then control the movements of the cursor on a computer screen or to substitute for the joystick function in a powered wheelchair.

Ghovanloo chose the tongue to operate the system because unlike hands and feet, which the brain controls through the spinal cord, the tongue directly connects to the brain via a cranial nerve that generally escapes damage in severe spinal cord injuries or neuromuscular diseases.

Before using the Tongue Drive system, the subjects trained the computer to understand how they would like to move their tongues to indicate different commands. A unique set of specific tongue movements resulted for each individual based on the user’s abilities, oral anatomy, and personal preferences. For the first computer test, the user issued commands to move the computer mouse left and right. Using these commands, each subject played a computer game that required moving a paddle horizontally to prevent a ball from hitting the bottom of the screen.

After adding the up and down commands to their repertoire, researchers asked the subjects to move the mouse cursor through an on-screen maze as quickly and accurately as possible.

Then the researchers added two more commands, single and double mouse clicks, to provide the subject with complete mouse functionality. When a randomly selected symbol representing one of the six commands appeared on the computer screen, the subject issued that command within a specified time period. Each subject completed 40 trials for each time period.

After the computer sessions, the subjects were ready for the wheelchair driving exercise. Using forward, backward, right, left, and stop/neutral tongue commands, the subjects maneuvered a powered wheelchair through an obstacle course.

The obstacle course contained 10 turns and was longer than a professional basketball court. Throughout the course, the users had to perform navigation tasks such as making a U-turn, backing up, and fine-tuning the direction of the wheelchair in a limited space. Subjects navigated through the course as fast as they could, while avoiding collisions.

Each subject operated the powered wheelchair using two different control strategies: discrete mode, designed for novice users, and continuous mode for more experienced users. In discrete mode, if the user issued the command to move forward and then wanted to turn right, the user would have to stop the wheelchair before issuing the command to turn right. The default stop command was when the tongue returned to its resting position, bringing the wheelchair to a standstill.

“Discrete mode is a safety feature particularly for novice users, but it reduces the agility of the wheelchair movement,” Ghovanloo said. “In continuous mode, however, the user is allowed to steer the powered wheelchair to the left or right as it is moving forward and backward, thus making it possible to follow a curve.”

Each subject completed the course at least twice using each strategy while the researchers recorded the navigation time and number of collisions. Using discrete control, the average speed for the five subjects was 5.2 meters per minute, and the average number of collisions was 1.8. Using continuous control, the average speed was 7.7 meters per minute, and the average number of collisions was 2.5.

While this initial performance trial only required six tongue commands, the Tongue Drive system can potentially capture a large number of tongue movements, each of which can represent a different user command. The ability to train the system with as many commands as an individual can comfortably remember and having all of the commands available to the user at the same time are significant advantages over the common sip-n-puff device that acts as a simple switch controlled by sucking or blowing through a straw.

Some sip-n-puff users also consider the straw to be a symbol of their disability. Since Tongue Drive users simply wear headphones, which is common when listening to music, the system is more acceptable to potential users.

“The Tongue Drive system seems to be much more supportable if there were a failure of some component within the system,” said John Anschutz, manager of the assistive technology program at the Shepherd Center. “With the old tongue-touch keypad, if the system went down then the user lost all of the functions of the wheelchair, phone, computer, and environmental control. Ghovanloo’s approach should be much more repairable should a fault arise, which is critical for systems for which so much function is depended upon.”

A future system upgrade will be to move the sensors inside the user’s mouth, according to Ghovanloo. This will be an important step for users who are very impaired and cannot reposition the system for best results, Anschutz said.

“All of the subjects successfully completed the computer and powered wheelchair navigation tasks with their tongues without difficulty, which demonstrates that the Tongue Drive system can potentially provide individuals unable to move their arms and hands with effective control over a wide variety of devices they use in their daily lives,” Ghovanloo said.

Solar cell costs coming down

Thursday, July 9th, 2009

Solar power’s heavy cost continues to be the downside to any kind of growth as a potential energy source.

By thinking differently, that may soon change. Today’s solar industry mainly produces solar panels made from crystalline silicon, which is relatively expensive.

However, new players in the solar industry have instead been looking at panels that can harvest energy with copper-indium-gallium-selenide (CIGS) or CIGS-related materials. CIGS panels have a high-efficiency potential, may be cheaper to produce, and would use less raw materials than silicon solar panels. That is the upside. The downside is manufacturing of CIGS panels on a commercial scale has thus far proven to be difficult.

There is now a low-cost solution processing method in development for CIGS-based solar cells that could provide an answer to the manufacturing issue, said Yang Yang, a professor at the UCLA Henry Samueli School of Engineering and Applied Science.

“This CIGS-based material can demonstrate very high efficiency,” said William Hou, a graduate student on Yang’s team and first author of a study on the subject. “People have already demonstrated efficiency levels of up to 20%, but the current processing method is costly. Ultimately, the cost of fabricating the product makes it difficult to be competitive with current grid prices. However, with the solution process that we recently developed, we can inherently reach the same efficiency levels and bring the cost of manufacturing down quite significantly.”

The copper-indium-diselenide thin-film solar cell developed by Yang’s team achieved 7.5% efficiency in the published study but has in a short amount of time already improved to 9.13% in the lab.

“We started this process 16 months ago from ground zero. We spent three to four months getting the material to reach 1%, and today it’s around 9%. That is about an average increase of 1% every two months,” said Yang.

Currently, researchers manufacture most CIGS solar cells using vacuum evaporation techniques called co-evaporation, which can be costly and time-consuming. The active elements, copper, indium, gallium, and selenide, heat up and go onto a surface in a vacuum. Using vacuum processing to create CIGS films with uniform composition on a large scale has also been challenging.

The copper-indium-diselenide material created by Yang’s team does not need to go through the vacuum evaporation process. Their material simply dissolves into a liquid, then they apply it and bake it. To prepare the solution, Yang’s team used hydrazine as the solvent to dissolve copper sulfide and indium selenide in order to form the constituents for the copper-indium-diselenide material. In solar cells, the “absorber layer” (either copper-indium-diselenide or CIGS) is the most critical to performance and the most difficult to control. Researchers can take the copper-indium-diselenide layer, which is in solution form, and paint or coat it evenly onto a surface and bake it.

“In our method, material utilization is one advantage. Another advantage is our solution technology has the potential to be fabricated in a continuous roll-to-roll process. Both are important breakthroughs in terms of cost,” Hou said.

The team’s goal is to reach an efficiency level of 15 to 20%. Yang predicts three to four years before commercialization.

“As we continue to work on enhancing the performance and efficiency of the solar cells, we also look forward to opportunities to collaborate with industry in order to develop this technology further,” Yang said. “We hope this technology will lead to a new green energy company in the U.S., especially here in California so that it may also bring job opportunities to many who need it.”

Wind project in holding pattern

Thursday, July 9th, 2009

The world’s biggest wind farm located in the Texas Panhandle is now on hold.

Texas oil billionaire T. Boone Pickens said the wind farm project fell apart partly because of the lack of adequate transmission lines to carry the electricity from remote locations to cities, according to a published report.

The oil tycoon had hoped to build new transmission lines but could not secure financing.

While this changes things quite a bit, Pickens still plans to use the turbines he ordered for the project.

Pickens had already ordered 687 large wind turbines from General Electric, starting in 2011. The problem came about when transmission lines built by the state were not going to reach the location he has leased until 2013, so he needed to put the turbines elsewhere. At one point, Pickens said he would build his own transmission lines, but difficulty in finding financing during the credit crunch affecting the nation forced him to shelve that plan.

Possible locations for the 687 turbines include Wisconsin, Oklahoma, Kansas, Texas, and Alberta, Canada, Pickens said. Collectively, at a capacity of 1,000 megawatts, which is the size of the power generated from a nuclear plant, this would still amount to a substantial investment in wind power. On the other hand, the Panhandle project power projections came in at 4,000 megawatts.

“We’re going to be active in the business,” Pickens said. “It’s not that we’ve gotten out of the business or anything like that.”

For related information, go to www.isa.org/environment.