Data analysis, Fault diagnosis and Simulation
for RS232, RS485, RS422, TTY (20 mA) ...
sioCHECK® is a software tool for analyzing data, and also for the registry and simulation of data on asynchronous serial lines (RS232, RS485, RS422, TTY).
sioCHECK® can „monitor“ the transfer of data between two serial-connected communication devices. The data will be continuously displayed and can be stored and analyzed. sioCHECK® is able to determine the transfer parameters on its own.
In addition to the possibility of long-term recording, sioCHECK® is able to acquire data through means of trigger conditions, because a trigger is able to be set for a certain event. Therefore, extremely rare faults can be displayed and later analyzed. Naturally, detailed expressions of the displayed data can be produced.
With an editor you can create your own simulation pro-grams, which makes sioCHECK® an independent participant in the communication process.
The capture of the status lines as wells as the registration of the data time, accurate to 1 µs, makes possible the precise analysis of time-critical applications.
In contrast to other potential solutions, sioCHECK® clearly has the decisive advantage because it captures the communicated data over the serial COM-ports of a PC. Other than a "monitoring cable", no additional hardware is required.
sioCHECK® is a tried-and-tested tool that quickly delivers your desired results. sioCHECK® is an indispensable tool for development, construction, installation, technical service and training.
|Fields Of Application
- Fault diagnosis on serial data lines
- Detection of sporadic transmission errors
- Protocol-analysis of serial connections
- Simulation of serial communications participants
- Long-term recording
- Development, installation, technical service and training
- Capture of data through the simple connection of an adapter cable into the serial lines
- Auto-Setup: automatic setting of the transmission parameters
- Capture of bi-directional data transfer between transmitter and receiver
- Online representation of data
- Long-term registry up to 16 million characters
- Maximum baud rate of 115,200
- Timing analysis accurate to 1 µs
- The level of status lines RTS, CTS, DTR, DSR, DCD and RI can be displayed graphically.
- Display possibilities of ASCII, HEX, decimal, binary
- Check-sum calculation through CRC16, CRCCCITT, X/Y/Z-Modem, CRC32, 3964R-BCC
- Representation of control characters
- Definable code table (ASCII, EBCDIC ...)
- Start and end trigger with varied trigger conditions (signal changes, data errors, time...)
- Data errors clearly marked in color
- Searches for data errors, status changes or character strings
- Registry of absolute and relative time
- Time and character statistics
- 16550 FIFO-support
- Extensive printing possibilities
- Optional: Converter for TTY, RS 422, RS 485 ...
- Your own editor with an easy to learn programming language (similar to BASIC/PASCAL)
- Directly executable simulation programs with loops, jumps, variables, data editing, calculation functions, as well as special commands for the transmission and receiving of data
- Transmission of one line of text, a file, or of a marked block in the data buffer (e.g. embedded in STX/ETX or 3964R-protocol)
- Execution of a simulation at the beginning of the program
- Start of the simulation possible through a trigger
- Year 2000 compatible
|PC, 386 or higher
Graphics: Hercules, EGA or VGA
530 KB main memory, 1 or 2 COM-ports
MS-DOS Version 3.1 or higher
|Please refer to our current price list for prices and order numbers.
|sioCHECK® Price List
Data analysis for RS232, TTY (20mA), RS485, ...
|SIO2000E sioCHECK 3.0
Data and protocol analysis, Fault diagnosis, Monitoring and Simulation for RS232, RS485, TTY (20mA) etc.
|primary license $335.00
|License, Manual, Medium: 3,5“-diskette
|SIO2005E 5-User-license sioCHECK 3.0
|SIO2010E 10-User-license sioCHECK 3.0
|SIO1201E Upgrade to sioCHECK 3.0 from sioCHECK 2.5
|SIO1202E Upgrade to sioCHECK 3.0 from sioCHECK 2.0
|SIO1203E Upgrade to sioCHECK 3.0 from sioCHECK 1.x
|SIO1101 RS232/V.24 T-adapter-cable for sioCHECK 3.0
For monitoring both communication partners of a RS232/V.24 data link.
|SIO1102 TTY(20mA) T-adapter-cable for sioCHECK 3.0
For monitoring both communication partners of a TTY data link,
integrated TTY => RS232 converter, no external power-supply necessary
|SIO1103 RS422/RS485 T-adapter-cable for sioCHECK 3.0
For monitoring both communication partners of a RS485/RS422 data link,
integrated RS422/485 => RS232 converter, no external power-supply necessary
|SIO1140 One additional COM-port for notebooks as PC-Card (PCMCIA) Type II
|SIO1141 Two additional COM-ports for notebooks as PC-Card (PCMCIA) Type II (only for Win95/98)